MPO MTP Trunk Cable OM4 3M PVC/LSZH Violet MPO Patch Cord 12/24
Fibers
1, Used to distribute part or all of the fiber in the relay cable
to other areas. can choose to have male or female plugs at both
ends
2, Using 12 fiber MTP connectors for termination
3, Round micro-core or kai installed cable to meet different
installation needs
4, There are 12 / 24 / 36 / 48 / 72 / 96 and 144 kinds of fibers
5, Pull eye design, suitable for different installation environment
6,According to TIA/EIA and IEC standards, high precision factory
pre-termination and testing
| Range of Mode | Singlemode or Multimode |
| Cable Type | Simplex, Duplex Ziocord. or Multi-cores |
| Connector Style | SC, FC, ST, LC, MTRJ, E2000, MU, MPO /MTP.etc |
| Polish or Ferrule Interface Type | PC, UPC |
| Cable Diameter | 0.9mm, 1.2mm, 1.6mm, 1.8mm,2.0mm, 3.0mm |
| Outer Jacket | PVC /LSZH/OFNP |
| Jacket Color | SM Yellow | OM1, OM2 Orange | OM3 Aqua | OM4 Aqua or Violet | OM5
Lemon Green |
| Durability | 500 cycles(0.2 dB max increase). 1000mate/de mate cycles |
| Operating Temp. | -20 ℃ to +70℃/+85℃ (armored) |
| Storage Temp. | -40℃ to +85℃ |
Product Description
MPO Female to MPO Female OM4 (OM3) Multimode Trunk Cable
ADTEK's MTP®/ MPO fiber optic patch cord series trunk cable
solutions offer an efficient way to quickly install large
quantities of cable while providing high flexibility in unplugging
and reuse, especially in areas requiring high density.
Please note: MTP connectors are fully compliant with the MPO
standards, achieving higher performance levels when compared to
generic MPO connectors.
Easy to connect and distribute,Compact and superior design
Small structure design minimizes cable density and storage space
Low insertion loss and hign return loss,Numbers of fibers:1,2,4,8
or 12
Single mode(PC,UPC or APC) and multiple mode PC polish
Comply with Telcordia GR-326-CORE specification
RoHS Directive-compliant,Flammability:UL 94 V0
| Type | Singlemode APC | Multimode |
| Performance | Standard Loss | Low Loss | Standard Loss | Low Loss |
| Insertion loss | Maximum Value | ≤0.7dB | ≤0.35dB | ≤0.5dB | ≤0.35dB |
| Typical Value | 0.4dB | 0.2dB | 0.35dB | 0.2dB |
| Return Loss | ≥60 dB | ≥20dB |
| Test Wavelength | 1310nm / 1550nm | 850nm / 1300nm |
ADTEK's MTP /MPO fiber optic patch cord series trunk cable
solutions provide an efficient way to quickly install large
quantities of cable while offering high flexibility in unplugging
and reuse. They are especially suited for applications requiring
high density, rapid deployment and high performance. These high
performance factory tested assemblies come pre-terminated with 12
fiber MTP connectors and are available in customer specified
lengths. 12/24/36/48/72/96/144 fibers are available. Users can also
choose from ribbon, small round, or kai-loaded fiber optic cables
depending on the project.
MPO trunk cable, a cost-effective alternative to time-consuming
field termination, is designed for high-density fiber patching in
data centers which need space saving and reduce cable management
troubles. With MPO connectors and good quality fiber, it is
optimized for 40G QSFP+ SR4/CSR4, 100G QSFP28 SR4 optics direct
connection and high-density data center applications.
