MPO-LC Duplex 3.0mm OM3/OM4 Break-out Cable Branch Length 0.5M
Branch OD 2.0mm PVC/LSZH Aqua
ADTEK's MTP /MPO fiber optic patch cord series trunk cable
solutions provide an efficient way to quickly install large
quantities of cable while offering high flexibility in unplugging
and reuse. They are especially suited for applications requiring
high density, rapid deployment and high performance. These high
performance factory tested assemblies come pre-terminated with 12
fiber MTP connectors and are available in customer specified
lengths. 12/24/36/48/72/96/144 fibers are available. Users can also
choose from ribbon, small round, or kai-loaded fiber optic cables
depending on the project.
| Range of Mode | Single mode or Multi mode |
| Cable Type | Simplex, Duplex Ziocord. or Multi-cores |
| Connector Style | SC, FC, ST, LC, MTRJ, E2000, MU, MPO /MTP.etc |
| Polish or Ferrule Interface Type | PC, UPC |
| Cable Diameter | 0.9mm, 1.2mm, 1.6mm, 1.8mm,2.0mm, 3.0mm |
| Outer Jacket | PVC /LSZH/OFNP |
| Jacket Color | SM Yellow | OM1, OM2 Orange | OM3 Aqua | OM4 Aqua or Violet | OM5
Lemon Green |
| Durability | 500 cycles(0.2 dB max increase). 1000mate/de mate cycles |
| Operating Temp. | -20 ℃ to +70℃/+85℃ (armored) |
| Storage Temp. | -40℃ to +85℃ |
MPO trunk cable, a cost-effective alternative to time-consuming
field termination, is designed for high-density fiber patching in
data centers which need space saving and reduce cable management
troubles.
0.35dB IL, MPO Female to MPO Female connector and 3.0mm Plenum
(OFNP) bunch cable is designed for 40G/100G direct connection and
high-density data center applications.
Item | Single mode | Multimoe |
| PC | UPC | Other Mode | 62.5/125 | 50/125 OM1/2 | 50/125 OM3/4/5 |
| Insert. Loss | 0.2dB Max. (0.15dB Elite) | 0.2dB Max. (0.15dB Elite) |
| Return Loss | ≥50 dB | ≥55 dB | ≥60 dB | ≥35 dB |
| Insert. Loss/MTP or MPO | 0.7dB Max. (0.35 dB Elite.) | 0.5dB Max. (0.35dB Elite.) |
| Return Loss s/MTP or MPO | ≥50dB | ≥55 dB | ≥60 dB | ≥20dB |
| Pull strength | ≥68N | ≥68N | ≥68N | ≥68N |
Highlights
Make MPO Trunk Cable Your Choice for High Density Fiber Networks
8 Fibers used for 40G QSFP+ SR4 direct connect applications.
Streamline network cabling in high-density data centers.
Allow for increased capacity and ease of cable management.
multimode fiber is designed to withstand tight bends and
challenging cabling routes with substantially less signal loss than
conventional multimode fiber.
Plenum Rated Outer Jacket
Plenum cables are purposefully built with jacket materials that
give off low amounts of smoke and retard flames spread, making sure
the cables are safe and heat-resistant.
7.5mm Minimum Bend Radius
With BIF, our cable is designed for improved bend performance in
reduced-radius applications such as residential or office
environments which have less bend sensitivity.
Test Assured Program
3D interferometer provides verification of MPO/MPO polishing
process, and making all parameters of the polished MT ferrule
complies and exceeds industry standards. Clean optical connectors
are paramount in providing a reliable, high-performance fiber optic
infrastructure.
